If you ever find yourself with a flat tire on the busy roads of Moore, OK, you may want to know how to change it! When by yourself, or not near a service center, having this skill could come in handy. Our staff at David Stanley Mitsubishi have put together a brief informational overview to help you and continue on your way to Buch Thomas Park.
Tools
To change a tire, you need a few essential tools to ensure the process is able to be done safely and efficiently. A crucial one is a spare tire, which should be properly inflated and in good condition. A jack is the next tool needed in order to lift the vehicle off the ground, allowing you to remove the damaged tire. You’ll also need a lug wrench or torque wrench to loosen and tighten the lug nuts securely in place. Lastly, a tire gauge helps check the spare's air pressure to ensure it is fit to drive.
Initial Steps
When you realize you have a flat tire, the first step is to find a safe place to pull over your Mitsubishi Outlander or Eclipse Cross on Route 35, preferably on level ground and as far away from traffic as possible. Turning on your hazard lights and applying the parking brake can also aid in your safety. Next, use the lug wrench to loosen the nuts on the flat tire. After this, the jack comes in, and you’ll need to locate the proper jacking point near the flat tire, and you can refer to the Owner’s Manual for further instruction with this. Position the jack securely under this point and slowly turn the handle until the flat tire is lifted a few inches off the ground. Once the car is raised, fully remove the loosened lug nuts and carefully take off the flat tire. Make sure to keep the lug nuts in a secure spot, as you’ll need them for the spare. Contact our Service Department if you run into trouble.
Final Steps
After the proper removal of the flat, align the spare tire with the wheel bolts and slide it onto the hub. Secure it by hand-tightening the lug nuts in a crisscross pattern for even pressure to be applied. Then, slowly lower the vehicle using the jack until its wheels are on the ground. You’ll follow this by tightening the lug nuts with a wrench. Use a tire gauge to check the spare's pressure and inflate it if necessary. Finally, drive cautiously to the nearest service center to have the damaged tire replaced, as this will not be suitable for continued driving and use of your Mitsubishi model. If you have any questions about the tire changing process, feel free to give our helpful staff a call!
Click to return to menu.
Close 
“ As much of a nervous wreck that I was, the salesman Neil put a lot of my worries to rest, and made my whole car buying experience a lot easier than I expected. He answered every single question I had quickly, but made sure that I fully understood the answers before we moved on. I really appreciate all of his patience with me. The rest of the staff, and service department were all very professional and welcoming, as well, all great people. I wouldn't take my new vehicle anywhere else... View More ”